"Ripping Chain" is a special chain designed for the long, heat producing, cuts during the milling of boards when using the Alaskan Mill. Cross cutting a log is different than cutting with the grain, in that cross cutting small chips are produced and cutting with the grain "Ripping" produces long stringy fibrous strands.
(ALWAYS wear PROTECTIVE GOGGLES or SAFETY GLASSES when GRINDING chain saw CHAIN)
Ripping Chain Basics:
To order chain, you need to know the Pitch, Gage and number of Drive Links. If you do not know this information, use the number on the drive link for Pitch and Gage and then count the drive links.
Ripping chain should run in a bar that is not worn. A worn bar will cause the bar to wander and the mill to cut crooked.
Pitch and Gage:(marked on drive link)
Oregon Chain
Carlton Chain
91 = 3/8 low pro, .050 GAGE
N1C = 3/8 low pro, .050 GAGE
33 =.325 .050
K1 = .325 .050
34 =.325 .058
K2 = .325 .058
35 =.325 .063
K3 = .325 .063
20 =.325 .050
B2 = .404 .058
21 =.325 .058
B3 = .404 .063
22 =.325 .063
A1 = 3/8 .050
51 =.404 .058
A2 = 3/8 .058
52 =.404 .063
A3 = 3/8 .063
72 = 3/8 .050
73 = 3/8 .058
75 = 3/8 .063
This item has FREE ground shipping Continental U.S.
NOTE: All prices Include Delivery Charges to Continental U.S. using Ground Service only
Ripping Chain
Products found in this category: 8
[1]
Page 1 of 1
Product Number
Size
G728-0
G728-0 .325 PITCH .050 GAUGE RIPPING CHAIN
G728-3
G728-3 .325 PITCH .063 GAUGE RIPPING CHAIN
G728-8
G728-8 .325 PITCH, .058 GAUGE RIPPING CHAIN
G729-0
G729-0 .375 PITCH .050 GAUGE RIPPING CHAIN
G729-2
G729-2 .365 .050 PICCO or 3/8 inch LOW PROFILE
G729-3
G729-3 .375 PITCH .063 GAUGE RIPPING CHAIN
G729-8
G729-8 .375 PITCH .058 GAUGE RIPPING CHAIN
G730-3
G730-3 .404 PITCH .063 GAUGE RIPPING CHAIN
P.O. Box 10306 Holyoke, MA
01041-1906 • Tel: 413-536-1342 • fax: 413-536-0796
Order Desk M-F 9:00AM to 4:30PM EST • TOLL FREE 1-888-778-WOOD (9663) .
(ALWAYS wear PROTECTIVE GOGGLES or SAFETY GLASSES
