How To Make Lumber With The Alaskan Chainsaw Mill MKIII

How to set up and cut a log into slabs using the G850 Slabbing rail brackets with 2 x 4 guides and the G776-24 Alaskan Saw mill.

The Alaskan Small Log Mill and Mini Mill in Use.
How to Cut a log that is longer than the G555b set up board.

Granberg International president Erik Granberg milling some urban timber into lumber with the Alaskan Small Log Mill.

Mike Wood of Talkeetna Alaska lives five miles out of town on the Susitna River. Using the Alaskan Mill and his canoe, he was able to cut and transport all the timbers and lumber needed to build his cabin.

Cutting Hawaiian hardwood with the Alaskan Mill by Darryl Fritz, a contractor located on Maui.

After drying, Darryl used one slab to make a beautiful Tiki Bar. A unique project made possible with the Alaskan Saw Mill.

Tables made by Glenn Holsworth cut with the Alaskan Saw Mill in Northern California.

Milling long timbers with the Alaskan has always involved a more complicated first cut set up due to the longer lengths. With the recent availability of laser levels and the EZ Rail guide system, this has been simplified. Our EZ rail kits come in 5 foot and 9 foot sections. This procedure can be done using any combination of different EZ rail lengths.