CARBIDE TIPPED HOLE SAWS

  • LENOX CARBIDE TIPPED HOLE SAWS

    LENOX CARBIDE TIPPED HOLE SAWS

    Designed for Cutting Tile and Stainless Steel

    LONG TOOL LIFE
    Heat resistant carbide teeth for long life in tile and stainless steel

    ADDED DURABILITY
    Thick backing plate resists damage and increases life

    UNIQUE TOOTH CONFIGURATION
    Engineered design provides ability to cut in stainless steel like no other

    USE STANDARD ARBOR OR SNAP-BACK™ ARBOR

     

    Specifications: Click on Product Number to Check Price & Order
    1-PACK DIAMETER PIPE TAP PIPE ENTRANCE USE ARBOR
    PROD NO IN MM IN MM IN MM Snap Back Standard Arbor
    3021111CT 11/16 17.5 5L 1L, 4L, 5L
    3021212CT 3/4 19.1 1/2 12.7 3/8 9.5 5L 1L, 4L, 5L
    3021414CT 7/8 22.2 3/4 19.1 1/2 12.7 5L 1L, 4L, 5L
    3021616CT 1 25.4 5L 1L, 4L, 5L
    3021818CT 1-1/8 28.6 1 25.4 3/4 19.1 5L 1L, 4L, 5L
    3022020CT 1-1/4 31.8 2L 2L, 3L, 6L
    3022222CT 1-3/8 34.9 1 25.4 2L 2L, 3L, 6L
    3022424CT 1-1/2 38.1 1-1/4 31.8 2L 2L, 3L, 6L, 7L
    3022626CT 1-5/8 41.3 2L 2L, 3L, 6L, 7L
    3022828CT 1-3/4 44.5 1-1/2 38.1 1-1/4 31.8 2L 2L, 3L, 6L, 7L
    3023232CT 2 50.8 1-1/2 38.1 2L 2L, 3L, 6L, 7L
    3023434CT 2-1/8 54.0 2L 2L, 3L, 6L, 7L
    3023636CT 2-1/4 57.2 2 50.8 2L 2L, 3L, 6L, 7L
    3023838CT 2-3/8 60.3 2L 2L, 3L, 6L, 7L
    3024040CT 2-1/2 63.5 2 50.8 2L 2L, 3L, 6L, 7L
    3024141CT 2-9/16 65.1 2L 2L, 3L, 6L, 7L
    3024242CT 2-5/8 66.7 2-1/2 63.5 2L 2L, 3L, 6L, 7L
    3024343CT 2-11/16 68.3 2L 2L, 3L, 6L, 7L
    3024848CT 3 76.2 2-1/2 63.5 2L 2L, 3L, 6L, 7L
    3025252CT 3-1/4 82.6 3 76.2 2L 2L, 3L, 6L, 7L
    3025454CT 3-3/8 85.7 2L 2L, 3L, 6L, 7L
    3025656CT 3-1/2 88.9 2L 2L, 3L, 6L, 7L
    3025858CT 3-5/8 92.1 3 76.2 2L 2L, 3L, 6L, 7L
    3026060CT 3-3/4 95.3 3-1/2 88.9 2L 2L, 3L, 6L, 7L
    3026464CT 4 101.6 2L 2L, 3L, 6L, 7L
    3026666CT 4-1/8 104.8 3-1/2 88.9 2L 2L, 3L, 6L, 7L
    3026868CT 4-1/4 108.0 4 101.6 2L 2L, 3L, 6L, 7L
    3027272CT 4-1/2 114.3 2L 2L, 3L, 6L, 7L
    3027676CT 4-3/4 120.7 4-1/2 114.3 4 101.6 2L 2L, 3L, 6L, 7L
    3028080CT 5 127.0 2L 2L, 3L, 6L, 7L
    3028888CT 5-1/2 139.7 2L 2L, 3L, 6L, 7L
    3029696CT 6 152.4 2L 2L, 3L, 6L, 7L

    Recommended RPM for each Carbide Tipped Hole Saw on page 82
    Note: We recommend the use of a carbide tipped pilot drill when cutting ceramic wall tile.
    Pilot drill 123CT fits the SNAP-BACK 2L or standard arbors 1L, 2L, 4L or 7L. Pilot drill 65CTPD fits the
    SNAP-BACK 2L or standard arbors 5L and 6L. See pages 72-73.

11CT    11/16in. 17MM 11CT 11/16in. 17MM Code: 3021111ct Price: $14.79 ADD TO BASKET
12CT     3/4in.  19MM 12CT 3/4in. 19MM Code: 3021212ct Price: $16.78 ADD TO BASKET
14CT     7/8in.  22MM 14CT 7/8in. 22MM Code: 3021414ct Price: $17.65 ADD TO BASKET
16CT  1in.    25MM 16CT 1in. 25MM Code: 3021616ct Price: $18.62 ADD TO BASKET
18CT  1-1/8in.  29MM 18CT 1-1/8in. 29MM Code: 3021818ct Price: $19.38 ADD TO BASKET
20CT  1-1/4in.  32MM 20CT 1-1/4in. 32MM Code: 3022020ct Price: $20.97 ADD TO BASKET
22CT  1-3/8in.  35MM 22CT 1-3/8in. 35MM Code: 3022222ct Price: $22.31 ADD TO BASKET
24CT  1-1/2in.  38MM 24CT 1-1/2in. 38MM Code: 3022424ct Price: $23.38 ADD TO BASKET
26CT  1-5/8in.  41MM 26CT 1-5/8in. 41MM Code: 3022626ct Price: $24.34 ADD TO BASKET
28CT  1-3/4in.  44MM 28CT 1-3/4in. 44MM Code: 3022828ct Price: $24.95 ADD TO BASKET
32CT  2in.    51MM 32CT 2in. 51MM Code: 3023232ct Price: $28.36 ADD TO BASKET
34CT  2-1/8in.  54MM 34CT 2-1/8in. 54MM Code: 3023434ct Price: $29.20 ADD TO BASKET
36CT  2-1/4in.  57MM 36CT 2-1/4in. 57MM Code: 3023636ct Price: $32.36 ADD TO BASKET
38CT  2-3/8in.  60MM 38CT 2-3/8in. 60MM Code: 3023838ct Price: $33.39 ADD TO BASKET
40CT  2-1/2in.  64MM 40CT 2-1/2in. 64MM Code: 3024040ct Price: $34.58 ADD TO BASKET
41CT  2-9/16in. 65MM 41CT 2-9/16in. 65MM Code: 3024141ct Price: $36.04 ADD TO BASKET
42CT  2-5/8in.  67MM 42CT 2-5/8in. 67MM Code: 3024242ct Price: $37.51 ADD TO BASKET
43CT 2-11/16in. 68MM 43CT 2-11/16in. 68MM Code: 3024343ct Price: $40.46 ADD TO BASKET
Have a question?

Need Help selecting a
Band Saw Blade?

Have a shipping question?