Finish what you started with the complete line of quality water based finishes from PC Finishes!

	No Harsh Odor
	Non-Yellowing
	Fast Drying
	Water Clean-Up
	Very Durable
	Ideal for the Professional and The Hobbyist!

PC Finishes represent the latest technology in water based urethane resins. They are very durable, resistant to abrasion, yellowing and marring.
All products are fast drying, have a very mild odor and clean up easily with water.
PC Finishes meet the highest standards of the demanding professional, and yet are so easy to use they are ideal for hobbyist and novice finishers. They have been specially formulated for best results when sprayed with a HVLP gun or sprayer, but can be applied by brush, pad or with a conventional spray gun.

Ideal for finishing interior and/or exterior woodwork, wood furniture, cabinets, toys, floors and more!

PC Finishes WB
PC-99 Series
Premium Polyurethane

The finest grade polyurethane in our collection.
PC-99 Premium Polyurethane is a combination of our highest quality resin in its purest form with a high concentration of UV stabilizer for a maximum protection of interior and exterior surfaces - even in intense sunlight!
Offers excellent water, chemical and scratch resistance, and the addition of the catalyst to the final coat affords the greatest scratch resistance possible.
All PC-99 Products dry to touch within twenty minutes and can be used with or without sealer.
Available in clear and in pigmented black or white. Can be tinted (HULS888 Color Trend System), and clear can be applied over black or white.
Ideal for floors, exteriors doors, bar tops and more!

Read the MSDS Sheet HERE
Read the Technical Sheets HERE

TO ORDER CLICK HERE

PC Finishes WB
PC-88 Series
Polyurethane

The perfect all-round finish for woodwork!
PC-88 Polyurethane is a combination of high-quality resins with UV stabilizer for superior protection of interior and exterior surfaces.
The excellent water and scratch resistance make this the ideal tabletop quality finish.
The fast drying, quick build characteristics, combined with UV protection and scratch resistance, make it the perfect all-round finish for superior protection of any woodwork.
All PC-88 products dry to touch in twenty minutes, and can be used with or without sealer
Ideal for tabletops, toys, interior doors and more!

Read the MSDS Sheet HERE
Read the Technical Sheets HERE

TO ORDER CLICK HERE

PC Finishes WB
PC-77 Series
Pre-Catalyzed Varnish

All the advantages of a solvent based polyurethane in a water based formula!
PC-77 Pre-Catalyzed Varnish is a combination of quality resins that offer lasting protection on interior surfaces.
It dries fast, won't yellow and can be easily repaired. The quick build and fast drying characteristics, combined with the durable water resistant finish, make it the perfect solution for years of high quality protection at an affordable price
Ideal for furniture, cabinets, molding, millwork, woodwork and more!


Read the MSDS Sheet HERE
Read the Technical Sheets HERE

TO ORDER CLICK HERE

PC Finishes WB
PC-2200 Series
Sanding Sealer

Easy to sand with virtually no grain raising on interior and exterior surfaces.
All ProCoat finishes are self-sealing. The use of a sanding sealer depends on three factors:

1. Surface Preparation: Will the surface be easy to sand flat following the initial coat?
2. Cost: Does the cost of the topcoat justify the use of a less expensive sanding sealer?
3. Time: Would completing the project without changing the material be an advantage?

Grain raising with the PC-22 Sanding Sealer will be no more than with a solvent based product under the same conditions.
Ideal for sealing raw wood prior to topcoat.

Read the MSDS Sheet HERE
Read the Technical Sheets HERE

TO ORDER CLICK HERE

PC Finishes WB
PC-1200 Series
Semi-Transparent Stains

The most versatile line of water based stains on the market!
Create a color, ANY COLOR! Twelve base colors can be mixed at whatever ratios are required to create any color you can possibly imagine
PC-1200 Series stains are a combination of quality resins and pigment that are ready to apply. They can also be used to tint PC-77 and PC-88 topcoats
Grain raising with PC-12 Series stains will be no more than with a solvent based product under the same conditions.
Mix any of these twelve base colors: Natural, Red Mahogany, Early American Walnut, Cherry, Maple, Ocean Blue, Emerald Green, Snow White, Sunflower Yellow, Red Raspberry, Purple, and Charcoal Black.
Ideal for color matching and for creating unique designs.

Read the MSDS Sheet HERE
Read the Technical Sheets HERE

Code	Description
PC-1200-01-?	Natural
PC-1200-02-?	Red Mahogany
PC-1200-03-?	Early American Walnut
PC-1200-04-?	Cherry
PC-1200-05-?	Maple
PC-1200-06-?	Ocean Blue
PC-1200-07-?	Emerald Green
PC-1200-08-?	Snow White
PC-1200-09-?	Sunflower Yellow
PC-1200-10-?	Red Raspberry
PC-1200-11-?	Purple
PC-1200-12-?	Charcoal Black
Use suffix - ? to specify size: "-1" for Quarts; "-2" for Gallons; "-3" for Five Gallons

PC Finishes WB
PC-1000 Series
Liquid Sprayable Pore Filler

Technological breakthrough! This premium quality water based liquid pore filler is ideal for producing a closed pore finish on Walnut Mahogany, Red Oak and other open pore woods.
Tired of trowels and sanding? Spraying it on ensures an even coat over the entire surface. PC-10 Pore Filler then self-levels into the pores and you're ready for your topcoat - it's that simple!
One application (coat) will normally suffice, although multiple coats may be applied without consequence, an in most cases without sanding
The superior wet adhesion properties of ProCoat products ensure bonding between coats and virtually eliminate sanding between coats of pore filler and/or prior to topcoat.
Can be used with or without sanding sealer, although typically applied after PC-2200 Sanding Sealer
Ideal for producing a closed pore finish.

Read the MSDS Sheet HERE
Read the Technical Sheets HERE

TO ORDER CLICK HERE