PC Finishes WB
PC-1000 Series
Liquid Sprayable Pore Filler
Technological breakthrough! This premium quality water based liquid pore filler is ideal for producing a closed pore finish on Walnut Mahogany, Red Oak and other open pore woods.
Tired of trowels and sanding? Spraying it on ensures an even coat over the entire surface. PC-10 Pore Filler then self-levels into the pores and you're ready for your topcoat - it's that simple!
One application (coat) will normally suffice, although multiple coats may be applied without consequence, an in most cases without sanding
The superior wet adhesion properties of ProCoat products ensure bonding between coats and virtually eliminate sanding between coats of pore filler and/or prior to topcoat.
Can be used with or without sanding sealer, although typically applied after PC-2200 Sanding Sealer
Ideal for producing a closed pore finish.
Read the MSDS Sheet
HERE
Read the Technical Sheets
HERE |
|
Code |
Description |
|
PC-1000-? |
Liquid Sprayable Pore Filler |
|
Use suffix - ? to specify size: "-1" for Quarts; "-2" for Gallons; "-3" for Five Gallons |
|