Cyber Woodworking Depot
Guest Book

Peace be with you. Great site! Best regards to all...

I'm looking for a replacement belt for an ELU radial arm saw. Anyone out there know of an outlet where I could get one. Thanks

I am looking to purchase floor sanding equiptment for home renovation. Need purchase source for new equiptment, or would consider fairly new equiptment. Thanks!

Great Site. Thank You! Great Site Great Site Great Site Great Site Great SiteGreat Site Great Site Great Site Great Site Great Site Great Site Great Site Great Site Great Site Great Site Great Site Great Site Great Site Great Site

REALLY LIKE THE QUALITY OF SECO TOOLS

WOULD LIKE TO BUY A HOLLOW CHISEL MORTISER,PREFER MULTCO THANKS

I bought a Duracraft 1 inch belt sander at a local yard sale. MFG date 1992. Where can I obtain parts and sanding belts. I think it had a small vacuum for the dust. This sander is a very nice tool. Thanks.

I build custom Cabinets, & Furniture.

I am looking for an owners manual or any additional information for a Craftman 12 inch bandsaw model # 113.24290. My husband reciently purchased one and he got no information on it. Help please.

We are engaged in various woodcraft business e.i. manufacturing , retailing, procuring tools. We would be delighted if you would kindly provide list for fine woodcraft tools. Thanks

Enjoyed the sight:1)Very happy to find a PowerKraft source in St.Louis, thanks to you. 2)Disappointed that I haven't found a source for recent Delta equipment manuals.

I realise this may be a long shot...I, along with two other Americans are in Northeast Thailand in the process of setting up a training and certification program for Thais. Although we do have many small tools we are in dire need of a table saw, bandsaw, jointer/planer. It's a bit difficult buying new tools and shipping them here with all the red tape, etc. Used tools are easier and the import duty tax quite a bit less. Much easier is locating tools in Thailand that are no longer being used due to the slump in the economy. Any information concerning the above tools either in Thailand or anywhere else would be greatly apprecitated.

Collecting 4" jointers, since they are no longer sold, it is had to find info & pictures of makes & models made in the last 50 years. Help would be appreciated. THANKS PHILIPPE

I'm looking for a Shopsmith overhead router table.

My father bought a really nice Delta wood lathe on an auction and it had no instruction booklet or any paper work with it and now he would like to use it and is not sure if it is put together right. Would anyone know where I could find this. Here is the model #46-700. 12 inch variable speed, 3/4 HP, 120 volts, 500-2000 RPM.

We have acquired an old Boice-Crane 14" Band saw in need of tlc. Would appreciate any information regarding parts availability for this tool. Sorry, do not have model number. Thanks.

HI I am looking for a festo two or three head moulder for cuting louvers for wood shutters or a machine that would do the same. Thanks

Interested in finding out the value and information on an antique nail puller. On the nail puller (Crescent Tool Company, Jamestown, New York USA Giant Trademark # 1

I have shop tools being sold at a benefit auction for a 9-month-old baby. I have a Rockwell Power Miter Saw Model 34-C10 on the list. The benefit auction is July 28.2001 at Andrew County Sale Barn in REA, MO. Lots of stuff, come help this little girl survive!

Searching for information on AMT woodworking tools. They were a PA based company. I have a bandsaw and desperately need parts. Please e-mail info. Thanks

I AM LOOKING FOR A FENCE AND A FEEDER FOR A DURACRAFT TABLE SAW, MODEL 10010 SERIAL NO. 33604 MADE 1987

I AM LOOKING FOR A FENCE AND A FEEDER FOR A DURACRAFT TABLE SAW, MODEL

Have an old Rockwell floor mode wood and metal lathe with chucks and wooden forms and tools. Have no time to fool with it or room to store it. How can I find out what it's worth? Thank you. starchiro@aol.com

I have a old Craftman 9" Lathe. The bed is cast iron and the spindle is run by a v- belt, pulley and motor. Would anyone know the Craftman part # for this Lathe or where I could get a new motor. Or maybe a picture of how it looks set up with a motor attached. I acquired only the bed, spindle,tailstock and tool rest

I am looking for a repair manual for a Craftsman 10" table saw built in 1985. Thank you for your assistance.

Hi: We are one of the leading cordless driver drill manufactures in Taiwan. We are looking for cordless driver drill agency, If you interesting, please kindly contact to me as following address: Sales Mgr.:Welson Hsu Add. :2F, No. 599, Hsin-Shu Rd., Hsin Chung City, Taipei, Taiwan, R.O.C Phone :886-2-2206-5330 Fax :886-2-2202-8829 Mobile :+886-935-486-317 E-mail:welsonshu@yahoo.com

Hi, I am looking for a Skil Planer Model 100 in good or broken condition. Please email if you would know of one I could buy. Thanks!!

We r looking for Air-conditioning spare parts specilized supplier for the equipment as manufactured by carrier /york and others.

We r looking for Air-conditioning spare parts specilized supplier for the equipment as manufactured by carrier /york and others.

I have an old Boice Crane 3/4" shaper. I think the model is 253? I would just like to know if anyone could tell me where i could find a manual. I am having a hard time adjusting the height if the bit. Thanks

My uncle gave me a schroll saw, that he bought at a auction. It's a Walker-Turner from Plainfield NJ. It has a Dunlap 1/3 horsepower split phase motor on it. Also it has a SJ102 engraved on it. I'm looking for a manual or any information, also a source for blades would be nice 6". THANK-YOU

Hi, Just thought I'd thank you for all the good information on your site. It really helped me with my last project. Consider your site one of my favorite bookmarks!
Thanks,
Henry
Check out Cash Register.

1st Floor Imran Plaza, 74 UmerDin Road Lahore Ph. 7600870

I have been taking woodworking lessons for about 4 years. I am slowly trying to accumulated tools for myself. If you have any catalogs, would you please send one to me. My street address is 9 Grafton St. With appreciation, Elaine

Would to sell Old Shop Smith Lathe and drill Press Comb. Model 10-E Serial 4482 Made by Magna Eng. San Franisco Cal. It's very old,has some rust. Price? Thanks

I am looking for information on the Hammond Router Planer, model RP-12, Serial # 455. thanks.

i would like a free catolog.Please email me if its possible. thank you

I have an old Craftsman scrollsaw or jigsaw(?), model 110 27760. Can anyone help me find a manual?(..so I'll at least know what I have? haha) I also have a Craftsman bandsaw of about the same vintage, as well as a tablesaw. I would like to find info on all of these.

very interesting,

I have a Beaver Jointeter and I need advice on set up' Any help would be appreciated. Keith

wanted trigger switch for McGraw and Edison shopmate 10" radial arm saw model number 5200AT4

have an old band saw porter cable /rockwell wood and metal any idea where i can get parts HELP

I Have A 10" rockwell homecraft table saw model 31-660 sn 106993 I need a motor for it please help me thanks D Bennett

I have a Montgomery Ward Powr Kraft 17inch drill press, Router, Shaper. Varable speed solid state. Model #2437B serial # 47X13774. Does anyone know where I can get this repaired the gears are giving me problems. Please help I need this fixed. Thanks

Im looking for a jig for making finished interior stairs any help would be appreciated.

Thank you :)

I would like to know if anyone has a wiring diagram for 110 volt wiring on a 6" AMT jointer from circa 1994. It's currently wired for 220 but I need 110. Any help would be appreciated, thanks.

I just moved from England to the USA, I have a 220 volt supply at my house, is there any reason my 220/240 volt power tools wont work here if i ship them over?

817-477-5482 FOR SAWS AND DRUM SANDER

I FORGOT TO TELL YOU THAT YOU CAN CALL ME ABOUT THE SAWS AND DRUM SANDER AND GANG RIP AT. 817-477-5482 EX.28

Is there anyone that would like to buy these woodworking tools? 1.DELTA 10" RADIAL ARM SAW,MODEL 33-975C 2.DELTA 12" RADIAL ARM SAW,MODEL 33-990 3.DELTA 12" RADIAL ARM SAW,MODEL 33-990,WITH TABLE 4.DELTA 12" RADIAL ARM SAW,MODEL 33-990,WITH TABLE 5.PATTERSON MULTISCORE (GANG RIP SAW) 6.SANDING MASTER DRUM SANDER & WITH BELTS TYPE CSB 2/900, SER.# MO-1238, NR # 737605 VOLT 220, CYCLES 60 ALL OF THE ABOVE WORK VERY GOOD.THEY NEED A NEW HOME.

I recently aquired a craftsman model 103.225451 table saw and am looking for an owners manual or info on the drive belt tensioning system for this saw. Any info would be appreciated

I`M LOOKING FOR T NAILS FOR A ROCKWELL HARDWOOD FLOOR NAILER

i have been given a emcostar super bandsaw/circularsaw it is a few years old i would like a parts list and supplier regards ray

i have been given a emcostar super bandsaw/circularsaw it is a few years old i would like parts list and supplier regards ray

I am looking for any information for a Parks Woodworking Machinery planer. It has a 2 horse motor and that is all I know about it. Does anyone know where I can find out any information on these machines? Thanks.

I acquired an Ensley Portable Bandsaw model 721 and it has monting points for a table-top base. The company discontinued the saw some time ago and have been acuired by Rothenberger (who was of little help). Anyone have any ideas on where I can look?

Resently bought old Beaver tablesaw and planer combined. Need information on how to sharpen blades of planer and setting it up

every thing u want for makista in paksitan ......

I am looking for an owner's manual for a Craftsman radial 100 radial saw, model #11329003. If anyone has access to one, please le me know. Thanks!

I have recently bought a older table saw,Delta Milwaukee Homecraft. Serial # BD4821. Could anyone give me information on the belt size and psssibly a picture of it?

We have exporting nailers and staplers with high quality at competitive price to world wide market. if you are looking for good supplier of nailers and staplers,please contact us. Thank you very much

I have a Buffalo table saw and need some parts. Anyone?

Hi, can anyone help me ? I'm looking for a decent, reconditioned circular saw & table. Please e-mail me if you have one.

I'm looking for some free plans to build a double or queen bed. Something simple and easy. Let me know if you have any ideas for me please

Sirs: I resently purchased a Walker Turner 16' Wood Metal cutting Band Saw SN 105 448. I was wondering if anyone has any information on this saw. It's extreamly heavy duty with 1/4" thick cast doors and a 1 1/4" blade. Any information would be apreciated. Thanks.

I have recently bought a old scroll saw. The name on it is WALKER-TURNER CO. INC. JERSEY CITY, N.J. I would like to find any info about the saw and the company. Does any one have a current address for said company or a site to find info on old machines?

i want router bits cataloge For latest work

Very Good Site, I am also looking to buy a secondhand Robland Combination Machine, cash waiting!

Very Good Site

Very nice web-site, please also visit www.sus.de

I'm looking for a source of replacement parts and/or accesories for a DURACRAFT 10" Model 15010 Tablesaw. Also would consider selling it. Great site...thanks.

I wonder if anyone could give me info on where to buy 'Dust Free' Flooring Sanding Equipment ie (the whole range)

Need manual for Dura CRAFT MODEL 1200 DRILL PRESS,OR LOCATION TO PURCHASE PARTS THANK YOU LEO DESARIO

Looking for an owner's & parts manual for a Craftsman 6" jointer. Model #103.23320. Tks

hi ya ,hiya,hiya,hiya,hiya,hiya,hiya,hiya,hiya,hiya,hiya,hiya,hiyaJohn Forever and wood tastes good

Hello woodworkers! I have a Pistorius dual-clamp industrial stapler for making picture frames. It was bought new by Keirstead Galleries in Kingston, Ontario in 1992 for US$4130.00. I am selling it for Canadian$2000.00 (approx. US$1320.00). Contact me for info and pictures! I am also liquidating my workshop, selling dust system, heavy duty table saw, Delta lathe, DeWalt 12" planer, vintage Delta drill press, Leigh dovetail jig, various other stuff. I live just west of Kingston, Ontario. Get in touch for more information! Thanks----Alan

Hi, Greetings from Finland.

Does anybody know where I can find a striker plate butt and or a lock front butt? This tool is similar to a hinge butt and wood allow acurate mortises for the affor mentioned as well as dead bolts etc..

looking for parts on a DURACRAFT bench top band saw, model VS 312, manufactured in 1982.

a

I'm interested in a used Shopsmith machine, model 510. If anyone has one or knows of one that may be available please e-mail me and share the information. Also looking for a used 6" jointer. Can repair or restore if necessary. Thanks,

I am currently re designing floor sanders has anybody got any suggestions or problems that I should consider, be they machine or user. Thanks Justin

I am re designing the floor sander can anybody mail me any problems that I should address- user or machine that I should address Thanks Justin

I AM IN THE PALLET BIZ, I NEED A SET OF WHEELS FOR A BAND SAW, ANY KIND WILL DO. I AM BUILDING A 60" WITH A FEEDER, ANY COMMENTS WELCOME!!

I'm looking for a Skil 100 plane to replace my husbands broken down one any parts for it also! Thanks!

Looking for motor for Duracraft 10" bench table saw model BTS-10 mfg date 1-1984.

I have a Craftman metal lathe model # 101-27440. It has a 9" swing. I am interested in a steady rest for the machine. Does anyone out there have one of these for this machine.

I am looking for Yamaguchi handtools. I have a nailpuller/holepunch(model 160) and it is the whip. I am looking for this tool or it's retailer. Please help

My friend has an old sliding table saw which is obviously not complete. We would like to see some pictures or a copy of an owners' manual so we can see what can be attached to the various fastening points. It says "Sears Ltd." on the slider but the serial number is unclear. On the main body it says "Hammond Glider TrimOsaw" Model G4B Serial 7771- Hammond Machinery Builders Kalamazoo Mich. Pat. 100,081-2,446,137-105,329-2,576,340-2,103,528-2,583,238-2,583,238-2,137,113.

Does anyone have any idea what a Craftsman tilting head bandsaw sold for new? Evidently these digital machines are no longer sold by Craftman?

RE : 13" Widebelt Sander. Dose anyone out there own one of these machines . General international mod# 15-025 or a Woodtek # 900-888. Im intrested in how well they preform.

I am looking for a used Delta Unisaw, 3HP. Would prefer an older one, but not necessary. Am able to pick up in most of New England, New York. Thanks, any information on where to look for one will be a huge help.

you need info on belt sander c-lamp thanks your site is great!!!!!!!!!!!!!!

You need to work on your online order form, it won't accept my e-mail address so I can't order on line from you. By the way the lathe I got from you last year is perfect, it does anything you could ask for.

You need to work on your online order form, it won't accept my e-mail address so I can't order on line from you. By the way the lathe I got from you last year is perfect, it does anything you could ask for.

I have an Inca model 259, 10" cabinetmakers table saw for sale. It has the mortising table, and other acc. If anyone is interested I would be glad to talk price with them. Nice site, thanks.

very good site love the plan for garage.tank you

looking for 1/4 hollow chisel for mortiser 19mm or 3/4 shank

I need a manual for a Busy Bee Wood copy lathe Model # 424 that is no longer sold. Thanks!!

Looking for used but useable heavy duty planer and shaper (110/220v). Need it this summer for use in the North Carolina mountains (will travel to nearby states to pick it up).

Oops! a full e-mail address would help!

I am looking for a part to a SKIL WORM DRIVE power saw. It is for a friend, and the only information I have been given is that it is around 30 years old, model 87, 8 amps, serial 0422277. I don't know which part is required. I am looking for someone who knows where parts can be found in australia, or alternatively, if there is an e-mail address I can contact Skil on. Any information would be much appreciated.

I'm looking for information on a Boice Crane 6" joiner?

I'm looking for information on a Boice Crane 6" joine?

helpfull sight I know people have a hard time finding duracraft so did i. i have a 12" by 4" duracraft bench band saw. i busted the plastic tenchon whele. anyway i found DUURACRAFT!!!! at duralinkeco.net.com

Shopsmith 11" Bandsaw with 6 extra blades. Good condition $350.00 CDN/$240.00 U.S. plus shipping costs. Also Shopsmith 4" Jointer. Brand new. Still in original packing. $500.00 CDN./$350.00 U.S. plus shipping costs.

thanks for the grate site. I am looking for nail gun that shoot acorigate steel faster. It is used for tieing plywood together. also need commercial grade equiptment to build raised panel doors. shaper,glue table, planer jointer If you know where I can find this type equiptment new or used please e mail me.

Thanks to the host for the privledge of posting. I have an old Craftsman thickness planer, model no. 112.1901 Sears has no more parts or info. Will pay a reasonable amount for a copy of the parts/instruction sheets. Any information will be appreciated.

Nice site, found it while looking for (and Still looking) a good used Table Saw. I'm a semi-retired Architect (NY Licence) will provide Architectural Drawings for a interesting project. on barter system, still have a small one man practice in upstate NY (summer up there,June to Oct., winter here in Fl) thanks for the site, Gerry

Impressive site. Hope it grows.

Looking for a slide for a Ohio Forge 14" bandsaw model 510-556. Part # inside slide is WA14-21. Thanks in advance

Please visit Creative Woodworks & Craftst Magazine Online for FREE projects, project archive, back issues, exclusive patterns, links, and much more!

I am looking for a motor or manual and parts for a rockwell model 10 radial arm saw

Nice site, I am looking for a S/H dust collection system reasonable price also a S/H 12inch planer/thicknesser, any other woodworking tools for a Coronet Consort Universal Woodworking Machine. Regards Denis

I recently purchased a Delta 12" wood planer at an auction. Model# 62-185, Serial#WZA145TBFR5510A8 L, I am looking to purchase an owners manual for this machine. Thank-you

I have a Dewalt radial arm saw model # 7730. I am in need of the protective guard for the for the three knife shaper head. Also, I need the jointer fence accessory for this saw. It is my understanding DeWalt no longer makes this saw. Does anyone know if parts or accessories can be purchased.

looking for used 18 or 20 inch 2 or 3 hp wood cutting band saw that is priced right phone 605 856 2872 or e mail thank you

Looking for a Sjoberg Swedish workbench. New or used. Any information on where to get one, would be greatly appreciated.

I'm looking for an INCA 570 jointer-planer. Is there a supplier in Canada? Anyone out there considering selling a used one?

looking to buy second hand eumenia 600.

champion tools traders

I'm looking for a headstock casting (mines cracked) for an old Beaver woodlathe (model WL3402-1) made by the Callander Foundry and Mrg. Co. of Guelph Ontario. If anyone has info, I would very much like to hear from you.

Our shop has decided to revive an ancient 16 or 18" wood planer manufactured by Rockwell during WW2. It has "Delta Milwaukee Crescent" on the bottom part of the machine and weighs 1700 lbs. (maybe this will help). The serial # is 6766-A, and our major problem is installing the cutting blades. Any publications or manuals will be of great assistance. Thank you.

I am looking for a contractor table saw preferably 10" and in working order.

please sign in

Recently acquired an old Walker Turner 6" Jointer. The only description is "Walker Turner Machine Co. Driver Line". I am in need of any manuals, publications or instructions on this old machine.Will appreciate any help. Also looking for Dovetail jigs to buy.

I have been given a old Boice Crane 10" table saw does anybody know where I can get Manual and parts? Thanks

LOOKING FOR A GOOD PRICE ON A 10 INCH BINCH TOP DRILL PRESS

We are dealing in all kinds of woods & all kinds of furnitures .

We would like to invite you over to our website which opened yesterday. http://www.cedar-chairs.com. We offer wholesale lumber quotes, custom furniture, stair parts & millwork. We offer many services on our site to help you promote yourself & your company. We also offer a wood sample picture database second to none, which you can use for your customers, or yourself. Stop by & visit us. Drop us a note while your there. Have a great day Ernie Drost Northstar Joinery

I am looking for a manual for a Craftsman Scroll Saw Model 103.23440. Would appreciate if anyone could tell me where I might look. Thanks:

We would like to invite you over to our website which opened yesterday. http://www.cedar-chairs.com. We offer wholesale lumber quotes, custom furniture, stair parts & millwork. We offer many services on our site to help you promote yourself & your company. We also offer a wood sample picture database second to none, which you can use for your customers, or yourself. Stop by & visit us. Drop us a note while your there. Have a great day Ernie Drost Northstar Joinery

WANTED: Skil Model 100 Electric Planer. Please email me if you have any info on someone who is looking to sell one in good working condition. mailto://jodan@zampa.dyndns.org

Looking for mid range cast table used 10" table saw and 6" or 8" similar quality jointer/planer in the Toronto area (Delta,King,Ridgid,General)

I have an Atlas lathe. Model # TH54. Serial # 028210. On it says Atlas Press Co. Kalamazoo, Mich. I was wondering if you had any parts for it. And if so, how much they cost. Or, if anyone is interested to buy it from me. Either way, I would appreciate it if you could tell me. Thank you-Guntek

trying to find out if there'sa spachel gage to set jointer blades to the right hight.my jointer is a craftsman 1966, model113-20621 i do not have the parts book for it, i bought it at an auction and i cant get any info. from sears, because it's to old. i would like the parts book&gage if i could thank you, henry e. fortin.1-8-01

I recently acquired a rusty old Boise Crane 6" jointer for 5 bucks.. After much sweat and new bearings, have rebuilt it to (almost??) new shape. Somehow I lost the inner bearing cap--cast iron thing thing w/2 screws. I assume this was to hold the press fit bearing in place, so rigged a couple of small clips to do same. Is this correct. Also need to know operating RPM speed and HP motor size recommended. Anyone out there have an owners manual? Date on infeed table casting was 3/22/54. Great, solid machine.

looking for parts for a duracraft wood turning lathe Model wl-1236-ul.need the removable key.If anyone can help me out I would apprecirate it.Thank you

looking for a thickness planer, good quality, 20-24 inch

looking for a thickness palner, good quality, 20-24 inch

I recently acquired a joiner/planer that has a 66" long bed and 8" wide cutter head. The only identification on it is the name ADVANCE followed by "Better by Design". Does any one know the manufacturer and their location? Would like to obtain any manuals that might be available. Thanks

just surfing the net ,what a great site

I'm looking to fit an old Rockwell 3400 wood lathe with a motor. Can anyone tell me what horsepower and RPM I should be looking for?

I have a Stanley Router, Model No H 258, 7/8HP, 3.0 amps, 230 volts, Serial Number W22977. It appears that it was made for Stanley Power Tools about 25 years ago by Bosch. I am wondering whether anyone has a replacement fan for the motor, or knows of a secondhand supplier who might have one? Any assistance you could give me would be gratefully received. Roger Jones

I am looking for a source for parts for a Rockwell 10" table saw, Model 34-345. Can you help? Thanks.

I am from Madurai, which is in South India. I am looking for manufacturers who may be interested in a joint venture to manufacture gasoline and electric chain saws and spares in Madurai.We can also feed neighbouring countries like, Thailand, Burma, Pakistan, Srilanka and Bangladesh and Nepal.The market is large.Will interested companies mail me at visveswardirect@yahoo.com

I am from Madurai, which is in South India. I am looking for manufacturers who may be interested in a joint venture to make gasoline and electric chain saws and spares in Madurai.We can also feed neighbouring countries like, Thailand, Burma, Pakistan, Srilanka and Bangladesh and Nepal.The market is large.Will any companies mail me at visveswardirect@yahoo.com

I have a Duracraft model 1600 Drill Press; Looking for the company to get parts, can not find them on the Web. Does any one have parts??

I was just given an old electric table saw but know nothing about it. It has a tag stating it is an "American model 6". It has a 2 HP electric motor which is separate from the from of the saw. It drives the saw with three belts. If anyone has any info or can tell me how to look up info for the machine it woul be greatly appreciated.

I'm looking for gibs (blade holders) for an 18" Delta/Rockwell planer. Model 22-200 - was hoping someone could help - thank you.

I'm building my own house and want to mill the oak trees on my land to use as hard wood flooring.

I own a 14"wood cutting bandsaw and want to find replacement part for it.please email me with any info.

I am looking for an old, heavy castiron bandsaw, with approx. a 30" wheel diameter. Any info or sites to go too would be greatly appreciated. Thankyou.

Looking for a place in the USA to buy parts and accessories for a Union Graduate lathe. Would appreciate any help or information.

Great site, I work as a translator and your site helped me a lot in an english-spanish translation in which I did not have any drawings. Thank you.

Where are the radial arm saws

I HAVE A 1953 DELTA/HOMECRAFT/ROCKWELL LATHE. I'M LOOKING FOR A NEW HEADSTOCK PULLEY. IT'S A FOUR V-GROOVE PULLEY WITH IN INSIDE BORE OF .985-.990 WITH TWO SET SCREWS. THEY DO NOT OFFER IT NEW. ON THE BACKSIDE (LARGE END) THERE IS A RING OF APPROX. 60 HOLES, FOR INDEXING. IF ANYONE HAS ANYTHING EVEN CLOSE, PLEASE CONTACT ME JEFF BIBB (636)-948-4183

Nice site

my mother gave me a cordless drill and jig-saw with no charger i would like to find out where to find an anoma an anoma abc-6 or abc-06e gharger but where do i shop?

WHO SELLS MAKITA HYPOID SAW PLEASE CONTACT ME THANX

I AM LOOKING FOR SOME JIMMY JIG PLANS.THAY ARE PLANS TO BUILD A SLIDING TABLE FACE FOR A BENCH SAW

I am looking for a used sliding 12" power miter box that bevels in both directions. Double bevel not necessary, but would be nice. Thanks, Mike P.S. Reasonably priced!!

I am looking for a used eight and a half inch Inka Joiner if anyone knows of any for sale, I would appreciate your help.

I have a friend looking for a belt for a Montgomery Ward table saw. It is not a standard size belt. Do you know where I might be able to find one. Thanks, Nice site.

Looking for a dealer for King Canada Table Saw - RM870 120 volt, 15 amp, 5000 rpm. Looking for a motor for this saw.

looking 4 a bench top scroll saw cheap !!!! 20 in

Just found this site,Please add to your list. Thanks

I am looking for a used Compound Mitre Saw - w/accessories and dust collection bag - any brand. Price to include shipping area code 60439

I'm looking for s Skill power Planer (hand). An older model will be ok I have one project. Thank

Looking for a 12-20 floor model planer. Will consider all brands. Also a large 14" and up band saw.

I have a second hand General 10" Tablesaw for sale just east of Toronto Canada with 52" Biesmeyer fence. Contact me if you are interested.

Estoy solicitando informacion sobre tornos y cepillos para madera marca craftman, delta, dewall, entre otros, gracias. Please.

Testing Guest Book

About six years ago when I studied Architecture. I used a small Table Saw to cut scale 2x4's, 2x6's etc. The table was only about 12" square, The blade was also very small, Approx. 5"-6". Anyone with any information on where to find this please email me.

I'm looking for a used 10" table saw in the Philly, PA area. Thanks.....cool site too.

I am looking for niqua, Antilope saw blade, and would appreciate it if you could give me the address

I have a older Sears scroll saw and it needs 6 1/2 inch blades and I can't seem to find any here in the Waupaca area and sur- rounding area. Any ideas on how to find them. Thank you.

I am looking for information on where to find parts for a Toolkraft Bandsaw, model 4500. I need Bandsaw tires and saw blades. Or infromation on where to buy Carter Products. Thanks!

Could you please e mail the following to my address: designs,hints,tips on shelving and work bench for a woodworking shed with limited space

Add me to your mailing list. Thank you

I own a duracraft band saw and I need a replacement driving belt for the darn thing. The broken belt reads synchro star g 200XL. Any help woulod be greatly appreciated.

I have inherited a 12" Boice Crane thickness planer, minus the blades. It has no visible model number. Can anyone provide a source for blades, owners manual, etc. Thanks

I am looking for a place to purchase parts such as tires for an older Delta/Rockwell Band saw. This looks like a good place to begin my search. Any suggestions welcome. Thanks, Bob

I have a Duracraft Drill Press, Model SP-30, Serial #012366, Made in 1980, Taiwan, Capacity 1/2". The left-handed screw fell out that holds the chuck in place and I need to know what size that screw is before I can replace it. I am having a hard time finding anyone who carries left-handed screws, especially when I don't know what size it is. Can you help? Thanks.

I am looking for parts for my Delta scroll saw Parts #1343632--1343599--1343625--Please advise

looking for good used metal lathe, thread capable 16 to 20 inch swing

You are WELCOME to visit my webpage,

I have a floor model drill press, ROYAL and would like any info as mfg,dated etc. Possible mfg.______ otto ? can't make it out. Thanks Ed

I'm looking for contact address for suppliers of EUMENIA saws made in Austria. A router/drill attachment is what I am after. Also if you have once of these saws, I'd be interested in having a chat or exchange an e.mail or two Ta Will

i need some parts for my 10'' bench table saw, tradesman

I am in need of a Sears Craftsman cast iron table sander.It uses a 6 X 48 belt. I believe they were made in the 60's and 70's. It has a round side sander I believe. If you think you have one please let me know right away. Thanks all.

Help I need information/copies of publication/instruction for an original/old Unimat small lathe I just received. No model # on the Unimat, Austria lable.

I am a retired plumber and home wood worker and heat my house and shop with woodstoves. About 5 years ago I hit upon an idea to make the moving of those heavy firewood logs from the tree stump to where I split them much easier. In these hills of West Virginia it is not always possible to get the tractor close to where you fell a large white oak, so cutting up the trunk into dimensioned logs and rolling them with The Log Roller was much easier than carrying them. These tongs have been a real labor savor.

I am 52yrs old partialy disabled after breaking my back and putter around in my shed doingg woodwork I would love to get some good cabinet plans if someone out there has some that i could use to keep me occupied These would be only for private use many thanks for this great site

Does anyone know where I can get a blade guide for my Ohio Forge Pro Series Wood Cutting 14" Band Saw model # 510-556? I have looked everywhere and cannot find the darn thing.

I am looking for a bosch PHO 25-82 electric planer. It has to be a 750W, with a measurement of 2-5mm. I would like to buy a new one. Any offers??

Iam interested in a used floor sander, can you help

NEW-NEVER USED- planer/molder/sander/saw-HTC 699 base-Corion guide deck-7 1/2HP single phase motor w/3HP dust collector-extensive accessories included-$3,500-

looking for a low cost bench edgebander for limited use

wicked man wicked

looking for a wood spindal supplier, spindals 1"dim. from 8" to 16" long.

Custom Cabinetry and Fine Furniture. Commercial and Residential. Serving the greater Virginia Beach Region.

interested in wood plain

WE WANTS SANDING BELTS & TIP SAW CUTTER MANUFACTURES WHO IS INTRESTED TO WORK WITH US IN PAKISTAN WE ARE THE SUPPLYER AND WE HAVE NET WORK TO THE PLY WOOD FACTORIES IN PAKISTAN

G'day I am looking for plans to build a sawbench for my workshop.Any assistance would be greatly appreciated

I am looking to buy a old Rockwell or Porter Cable circular saw #315 or #346 or #596 with break. Please email with any information. Thank you.

I Just bought a Rockwell #9 homecraft tablesaw from a yard sale. Can anyone direct me to a source that can supply me with parts.

I have a 10" Ohio Forge table saw and I am looking for a replacement part. I am looking for the apparatus with the degree adjustments that moves forward and backward on the table. Being a novice I'm not sure of the exact name. Any help would be appreciated.

We are not end user we supply various Itom to the Plywood factoies in Pakistan Itom ( wood cuters sanding belts blads & tools

I am looking to buy a machine for sharpening tree stakes please give me any imformation on purchasing or where to locate.

I need a manual for a Tomesani TB-50 louver groover. If you can help me I would appreciate it. Thanks, Stephen

REQUIRE ANY INFORMATION ON MACHINERY ON UK PRODUCTS MACHINE TOOLS AND WOODWORK MACHINES CONTACT ME FOR A CHAT

What are the brand name of the motors on your machinery? (drill press, wood lathe, band saw) Thanks

-Looking for a good used Delta 10" Unisaw, 3 h.p.minimum with 50" fence.

I have a 1950's era Craftsman Radial 100 table saw that I would like to sell. Anyone interested, please contact by e-mail.

I am looking for a supplier of replacement parts for a Rockwell model #10 radial arm saw. The aluminum piece in the tower that controls lift has stripped and with a replacement piece it will be as good as new. Can anybody help me? Thank you.

great site, thanks. now bookmarked in my list of favorites

Just found your site and I'm just getting started in woodcrafting. Really enjoyed visit and will add to my favorites. Thank-you

n/a

We have just completed building our new Gazebo Picnic Deck from a pattern that we had ordered for you. It turned out PERFECT! We love it!!! Your patterns are very easy to follow, especially for beginners like us. Just ordered some more patterns, from you, for our deck furniture...can't wait to get them finished so that we can add them to our new patio. THANKS FROM THE NEWFIES!!

habitualmente consulto su pagina para ver maquinas para hacer trabajos en madera, me parece una pagina excelente

I have a 14" OHIO FORGE bandsaw/1989 manf/model#510-556-- The table support castings are broken. nice saw need replacements - or point me in the right direction to aquire - thanks

Superb site,excellent prices (compared to rip off Britain.)Looking for plans,or suppliers of plans for fretwork clocks. Thanks for an absorbing hour or so.

Great site.I would like some small wood working projects to do on weekends.Plans would be gratfully accepted.

What a great site! I'm a disable woodworker and think your products are right on the money.I really like table saw#8035A,this is the saw for me.About 10 years ago I bought 2 black and dercker table saws and bolted them together ,used the one on the left for sawing and ripping and the one on the right for dadoing.This gave me 2miter plus 2 rip fench unlimpted jigs can be built.If anyone wantsA large saw for havle the price this the way to go .As soon as Iam able($$$)I am going to order 2 of#8035A Bobby

I'm looking for free plans for a queen size Murphey bed.

I have acquired a EMCO UNIMAT DB200 Mini lathe, belts are shot I was wondering where in Ontario Canada I can get them. Thanks

Its so unfair the prices we have to pay in england compared to the US is outrageus. Do you import to the uk and do you sell 240volt/110volt appliences please let me know thank you from Ian

Looking for a heavy-duty floor model Oliver mortiser? My husband has decided to sell his. It has 3/4" chisel/bit capacity, new electricals, foot pedal -- and is in perfect working condition. Let me know if you're interested.

building first woodshop will take any ideas listed

Novaspray - Australia's only HVLP manufactures. Special discounts for woodworking enthusiasts. Always looking for distributors.

Have Shaper with 1/2" & 3/4" shaft. Need bits to fit same.

Estoy interesado en un minitorno para madera con aditamento copiador y un catalogo sobre torneado de madera,me gustaria recibir informacion,fotos por correo postal a: Cra 66B #64-07 Barranquilla-Colombia URGENTE THANK YOU. I hope you understand me. Delivery Express

I have recently retired and have an interest in wood-turning and I am on the look out for a lathe,is there any out there first time on site will comment when I get to know you better many thanks Bob

I recently bought a Collins 10" Compound Miter Saw, and am currently looking for parts. I would also like to know if this company has a web site.

I am in need i=of a top wheel for a Boice-Crane Band Saw. Anyone have any info that may help me?

20 INCH DIA. CARBIDE TIPPED SAW BLADES FOR SALE. EXCELENT FOR CABINET WORK OR ANY PLACE THAT YOU WANT A CHIP FREE CUT. CONTACT ME VIA E-MAIL AT dhansen@vbe.com

I am the proud new owner of an antique woodworking machine, "The Master Woodworker", built by Master Woodworker Mfg. Company, Model #12, Machine# 12575. The machine is a driven by leather belt via electric motor. It is in working order..I am interested in tips, triva, instructions, and of course, what is it worth ? THANKS !!

Am looking for new or used floor sanding equipment (both sander and edger)

Would like to buy chuck for woodturning. New or used moderatelly priced.

WANTED: Older Skil Model 100 Planer (metal bodied) 5.5 or 7.5 amp.

Sorry, you didn't have what i needed.

I have an ohio forge drill cordless, my battery is dead can you help me locate a battery for this drill(7.2 volts)

Great site!!! is there more like this?

I am looking for a high production plainer/Tongue and Groover. It should be capable of production runs of at least 500 mbf per hour. Does anyone know of any new or used equiptment of this type?

I BOUGHT A DURACRAFT TABLETOP BAND SAW MODEL # BBS 412 USED IT ONCE AND ONE OF THE BEARINGS FROZE UP NEED HELP TO FIND SOME OF THEM.......

Looking for Duracraft Bench Bandsaw, Model No; 20412, 3 tires or information to get parts.

Looking for compund miter saw angles

Help. I need a base for my 12 inch Delta planer. Mine is cracked and a base from Delta is 1/3 cost of an entire planer.

I just bought an old Delta Rockwell lathe and need a few parts, any good on-line sites I should check? Thanks.

I just bought an old Delta Rockwell lathe and need a few parts, any good on-line sites I should check? Thanks.

I purchased a used 10" Skil band saw, and am having trouble with the blade slipping off the wheels. Does anyone have an manual for this saw, with instructions for adjusting blade guides, etc? Thanks!

Looking for a sprocket for a mobel 344 planer/molder brand name Foley part # 505116 17 tooth sprocket

AFTER TWO CHOP BOXES, ONE DEWALT THE OTHER BLACK & DECKER CHOP BOXES WITHIN FOUR YEARS I SWITCHED IN THE EIGHTIES TO A ELU MADE IN WEST GERMANY TYPE TGF172 (1981). NOW THE BEARINGS ON THE SHAFT TO THE BLADE ARE WOREN STARTING THE BLADE TO VIBRATE, WOBBLE AND THE LEFT HAND BOLD NOW WORKS ITSELF LOOSE AFTER FIVE OR SIX CUTS. NEW BEARINGS, SHAFT,BELT, CABLES FOR THE SAFTEE GUARD

GENTLEMEN: I HAVE OLD ATLAS POWER KING TABLE SAW THAT HAS NO MOTOR IT'S ABOUT A 7in. (MODEL# 282 SERIAL# 35763) THE TAG ON IT HAS ATLAS, PRESS CO. KALAMAZOO,MICH. ANY HELP YOU GIVE ME WOULD BE APPRECIATED!! LeRoy John

Our radial arm saws have now been in production for the last three years parts for clippers are well stocked, other saw line parts available. call for more info.

I have for sale a yates american 3 drum sander. 49"wide,big and heavy. footprint is about 10x10 and weighs about 14000lbs. also a French combination machine 5hp 16"planer/jointer,3hpshaper with 1"spindle and sliding table, horizontal mortiser, and 12"table saw.Email reply please or call me at work at 972 247-9086

I am looking for a used Delta Unisaw or a General table saw Also used thickness planer, jointer, and dust collector

I,m looking for a blade brake for an old 9" dewalt radial arm saw.(I have already tried Wolfe Machinery)

DOES ANYONE HAVE PLANS,ETC FOR BUILDING SMALL 1-MAN CYPRESS OR CEDAR STRIP BOAT ???

please tell me where I can find lefthanded powertools. especially circular saws

I inherited a Boice Crane 14in. Band Saw. I can't get the blade tension assembly to work correctly. Need help, either firsthand knowledge of how to reassemble or manual.

looking for a drive wheel to fit a 10-inch Delta-Rockwell bandsaw.

I need the spm rate on a Craftsman 113.207600 scrollsaw. Also, what is the best scrollsaw for under $200.00 that has the following specs.: variable, dust collector, tilt left and right, 1800 spm (min) and a 7/8" stroke?

I AM LOOKING FOR A TOOL THAT WILL SHAPE AND PLANE HARDWOOD FLOORING AND PANELING. 4 HEAD ONE SIDE SURFACE. USED WOULD BE NICE. ANY SUGGESTIONS OUT THERE??????HELP.

The best saw on the market is back. The saw that put production in west coast framing. Trailer mounted, 20" blade, 5 hp motor.

The best saw on the market is back. the saw that put production in west coast framing. Trailer mounted, 20" blade, 5 hp motor.

Looking for place to purchase saw blade for Comet saw

I am looking for a 220 Super 8 Clark Flooring Sander Please respond to: harron@capital.net or mindygregory@hotmail.com

I am looking for 15 inch planer blades for a Northwood Autoplaner model #1p-15. Is this company still in business?

Looking for an ELU biscuit joiner.

interested in a 20 inch planer

I am looking for a 12" or 16" old castiron jointer working or not. 3 phase electrical ok. If you have any large industrial equiptment for sale please contact us we have a lot of manfacturing friends who are always looking for various machines thank you 'Eric'

I am looking for a 12" or 16" old castiron jointer working or not. 3 phase electrical ok. If you have any large industrial equiptment for sale please contact us we have a lot of manfacturing friends who are always looking for various machines thank you 'Eric'

I have an older table saw - Delta / Homecraft and no place to keep it. It's getting rusty on the table and needs some parts to restore it - but I've been using it. Free. I'll deliver if it's close enough, or meet you half-way?

Anyone owning a Inca Major 341.018 table saw, I have all sorts of accessories.

What type of compound miter saw does Norm Abrams use that shows a light where he cuts.

Looking for a laser chop saw like Norm uses.

If anyone would like to take the leap from hobby to profession, I have 2 Locatelli, hopper feed, production wood lathes for sale. Each produces a 34" turning about once every 29 seconds. $40K for (both) includes Nash spindle sander.

If anyone would like to take the leap from hobby to profession, I have 2 Locatelli, hopper feed, production wood lathes for sale. Each produces a 34" turning about once every 29 seconds. $40K each includes Nash spindle sander.

Would like to find a jointer/planer and also a small planer/Moulder for wood shop. Thank You TY

A great site! I came here as the result of a search for info on a Wards (oem'd by toolkraft) drill press. I immediately found a number for toolkraft, and they answered the phone. Less than 10 minutes after starting my search, I had ordered the belt, and it'll be shipped today! Thanks so much. Dave

Would like to find a used jointer or jointer/planer and also small moulder/planer for wood shop. Thank You TY

I'm looking for parts for a Duracraft bandsaw.

Use dremmel to make my own fishing lures.

Looking for radial arm saw & plainer